|
Safety
Warnings!
| Remove Power
from the spa/hot tub and circuit breaker panel BEFORE working on electrical equipment!
Failure to comply with this requirement, can lead to electrical shock and/or
electrocution! This is a
GENERAL GUIDE ONLY! USE this information at your OWN RISK! Consult with or hire a licensed electrician before beginning any work of this
type!
|
Disclaimer
|
READ FIRST BEFORE YOU CONTINUE
|
|
| Self
Contained, Digital, with GFCI |
|
|
| Breaker Trips: |
Check these References
(Most likely Causes Listed) |
| Immediately upon application of Power. |
| 1. New Installation or Modified
Recently. |
Go |
| 2. Existing Installation, was
working previously. |
Go |
|
| After a few seconds, up to a few
minutes after power application. |
| 1.
Blower |
Go |
| 2.
Ozonator |
Go |
| 3. Heater
Element |
Go |
| 4.
Other |
Go |
|
| After an hour or
so. |
|
| Unpredictable, sometimes hours,
sometimes days. |
| 1. GFCI Wiring at Panel,
GFCI |
Go |
| 2. Heater
Element |
Go |
| 3. Blower |
Go |
| 4. Ozonator |
Go |
|
| More
Help... |
|
|
|
|
Use this information at your
own risk! Consult or hire an electrician if in doubt as to your particular
application. |
Any suggestions? (We're always looking for new things here!) Email us: Site Suggestions
Parts or Tech Help
|
|
